| |
| >>Construction: |
Fully
welded R.H.S. finished in industrial acrylic enamel
|
 |
| >>Electrical
System: |
3
phase, 440 volts main supply
Control system, 240 volts, 50 Hz
indicator, 12 volts
maximum power output draw at full load, 16.6 kW.
current draw 23.1 amps
Hour meter, remote stop stations (4), low water level
pump timer fitted as standard
solution heater optional
control centre switches conform to I.P56 standards. |
|
| >>Vacuum
System: |
Two
banks of three 2 stage tangential pumps in series /
parallel configuration.
Maximum air flow 25.4 litres / second @ 50 mm orifice. |
|
| >>Hydraulic
System : |
4
kW power pack with double pumps and full filtration
maximum operating
pressure 103 bar @ 15 litres /minute, system capacity
60 litres
Lift rams protected by load holding counter balance
valves. |
|
>>Solution
Pressure
>>System: |
Self
priming double duplex diaphragm pump
maximum operating pressure 3.1 bar @ 7.28 litres / minute
fully filtered spray nozzles |
|
>>Solution
Recovery
>>System: |
High
density polyethylene recovery tank with two
stage gravitational filters
removable top cover for clean out |
|
| >>Cleaning
Brushes: |
Hydraulic
drive 300 mm diameter polypropylene trim at 250 R.P.M. |
|
| >>Polishing
Brushes: |
Hydraulic
drive 270 mm diameter polypropylene trim at 360 R.P.M. |
|
| >>Driver
Rollers: |
Variable
geared hydraulic drive 260 mm. diameter, non staining
pneumatic.
0-10.5 R.P.M. maximum drive speed approximately 20 metres
/ minute. |
|
>>Warranty:
|
1-Year
unlimited hour warrantee - Extended warrantees available. |
|
| All
specifications subject to change without notice |
|
